Fenrir CoreXY update!

Hi all! 

This month most of my time has gone to working on Fenrir.

I got the components I needed from LDO and I’ve been focusing on tweaking the design to the specific components, printing prototype parts, and editing as needed to make things easier to print, more rigid, tweaking etc. 

I’ve also made a fan bracket with ducts to the Nema14 A and B motors, to avoid any heat issues that might arise, this fan bracket actually also makes it easier to print the top, more specifically support removal is way easier now! 

Currently, I’m printing the updated top, and working on a few more things on the other parts. I’ll continue printing them as the parts get done. 

The launch of Fenrir is getting closer and closer! 😀 

I would like to thank you all for the support! 

Thomas the MakerViking

A slight delay because of covid

Hi all!

I had planned to post the Orbifly files by now, but I’ve been sick for a couple of days and I tested positive for Covid yesterday, which explains why. This has resulted in the slight delay mentioned in the title. I do expect to soon feel better again, so it won’t be long before the files are available.

Thanks,
Thomas the MakerViking

Orbifly – Direct Drive mount

Here’s an update on the Direct Drive mount I’m hereby calling Orbifly, for printers with the Ender 3 style mount. 

This mount uses the Orbiter and Phaetus Dragonfly BMO, and also has an integrated Pinda probe v2 mount.

I plan to make a version for both Orbiter 1.5 and 2.0.

I will be releasing the files in a few days to all Patreon tiers.

Thomas the MakerViking

Orbiter + Phaetus Dragonfly BMO – Direct Drive mount

Hi all, 

I’m working on this Direct drive mount for the Ender 3, Pro, and other printers with a similar hotend bracket. 

This mount uses the Orbiter and Phaetus Dragonfly BMO, and also has an integrated Pinda probe mount. Hopefully, this is useful for some of you. 🙂

I plan to make a version for both Orbiter 1.5 and 2.0. 

I will be releasing the files in a few days to all Patreon tiers. 

Thanks,
Thomas the MakerViking

Phaetus Dragonfly BMS mount for MGN12 mounted on 2020 extrusion

I made this for my Twotrees Sapphire S CoreXY a while back, but I’ve now modified it to fit on an MGN12 linear rail, mounted on 2020 extrusion. 

The Dragonfly BMS mounts to the carriage, and all the fans are mounted on their own bracket that slots into place on the carriage. It makes for quick access to the hotend, with no removal of screws.  

It has two 5mm LED’s integrated on the backside, to light up the area around the nozzle. 

The fans used are a 4010 for the hotend cooling and 4010 Blower fans for the parts cooling. 

I will release both the 2020 version and Twotrees Sapphire S version to my Patrons in a few days. 

1 2 3 4 5 6